[OYAKOIRUKA] Slim Thermo Stainless Steel Bottle (300ml) [Shipping in mid-March]

*Wallpaper with a limited design will be given to those who purchase goods!
Please read the QR code on the card you will receive with the goods and receive the gift from OYAKOIRUKA!

Order pre-order period: January 25, 19:00 - February 4, 10:59
Expected shipping date: Around mid-March

It's a thermo stainless steel bottle with me, mom and PI-CHAN printed on it 🥰

This bottle will keep you warm and cold for a long time ✨

Enjoy your favorite beverage in our bottle☺️

Contents

1 piece

Size

Approx. 57mm dia. x 180mm H (300ml capacity)

Material

Inside of the main body, inner bottle: stainless steel
Outer side of the body, body: Stainless steel
Lid: Polypropylene
Sen body: Polypropylene, ABS resin
Packing: Silicone rubber

Color

Smoke blue

*Since the material is very fragile, some scuff marks may appear during processing. This is unavoidable due to the convenience of the processing machine. We take the utmost care to prevent scratches, but please understand this beforehand.

＜About the heat-retention and cold-retention functions

Heat retention: (6 hours) 53°C to 72°C
Cold keeping effect: (6 hours) 6°C to 10°C

What is the temperature retention efficiency?
The temperature of the hot water is defined as the temperature of the water when the bottle is opened at room temperature of 20°C±2°C for at least 2 hours, hot water is poured into the bottle up to the bottom of the lid, and the bottle is left at 95°C±1°C for 6 hours and 24 hours.
Cold holding capacity is defined as...
The cold holding capacity is defined as the temperature of the water when the bottle is opened at room temperature of 20°C±2°C for at least 2 hours, cold water is poured into the bottle up to the bottom of the lid, and the water is left at 4°C±1°C for 6 hours and 24 hours.

＜Please check before purchase.

The printed surface may be stuck to the packing bag in rare cases. Due to the nature of the printing method, depending on the humidity and temperature (especially high temperature and humidity) during shipping, the printed surface may, in rare cases, be stuck to the packing bag or other packaging. In such a case, please remove it slowly without pulling it strongly or turning it over.

UV ink has a peculiar smell. The smell will disappear with time, but if it bothers you, please wash and dry it well.

Please refrain from using a dishwasher, metal scrubber, or abrasives, as they may cause the print to peel or chip.

Due to the nature of printing, slight streaks may occur in the direction of rotation. This is a normal specification and is not subject to refund or exchange.

＜Cautions for handling

Please wash the body and lid well with a mild detergent before use.

Do not use chlorine bleach to bleach the inside of the body. Do not use chlorine bleach to bleach the inside of the body, as the paint may peel off if the bleach adheres to the outside of the body.

After use, wash the product with a sponge or similar tool moistened with neutral detergent, then dry it well. Do not use a scrubber or polishing powder as they may cause scratches and rust.

Do not soak or boil the pot.

Do not soak or boil the pot. Do not use this product after the temperature of the beverage has dropped to a drinkable level.

When carrying the bottle, make sure the lid is completely closed and stand the bottle upright to prevent water leakage.

Do not use the container for carbonated beverages, dry ice, salty soups such as miso soup, alcoholic beverages, milk and other dairy beverages, fruit juices, pulp, or tea leaves.

Do not use in microwave ovens, ovens, or freezers.

Do not use in a dishwasher or dryer. Do not drop or shock the container.

Do not place near fire or in high temperatures.

Do not use the product for purposes other than its intended use.

Do not place in the reach of small children.